General features:
Infuses and withdraws.
• Accepts small syringes or large syringes, up to 60 cc.
• Dispense continuously at a fixed pumping rate
• Change pumping rate and direction while pumping.
• Selectable rate units: µl/hr, µl/min, ml/hr, ml/min.
• Dispense a specified volume.
• Dispense according to a pumping program to:
• Pre-program dispense volumes. Each volume can be different.
• Automatically change pumping rates or pumping direction.
• Ramp up or down the pumping rate.
• Timed delays between dispenses.
• Automatically pause the program and wait for the user to continue the dispense.
• Synchronize dispenses with other equipment or pumps to change pumping rates in reaction to a sensor or signals from other pumps.
• Send logic signals to other equipment. Change pumping rates in reaction to a sensor.
• Program the audible alarm to beep at any time to alert the operator.
• Enter the pumping program from the keypad or download it from a computer.
• Operates stand-alone , from an RS-232 computer port or from the TTL logic interface.
Programming features:
• 41 programmable phases.
• Set event interrupts from external signals to cause automatic jumps to another part of the program.
• Conditional jumps based on external inputs.
• Nested loops: Repeat a section of the program continuously or a set number of times.
• Program editing functions: Insert and delete program phases. Simplifies program development and updating.
• Allows quick removal or addition of program phases.
• Enter programs from the keypad or from a computer.
• Download or upload pumping programs from or to a computer. Store dispensing programs in a file on your computer, then download them to one or more pumps. Specify in the file to send a different pumping program to each pump in the pump network.
• Automatically change pumping rates.
• Insert timed delays between dispenses.
User interface:
• Easy to use 9 key elastomer keypad with raised keys. Not a membrane switch keypad!
• Simplified user interface.
• No modes to select! Intelligent firmware automatically selects the appropriate operating mode.

NE-1000 Single Syringe Pump

Holds 1 syringe, from the smallest available, up to 60 cc
Infusion rates from 0.73 µL/hr with a 1 cc up to 2100 ml/hr with a 60 cc syringe

Here you are>Products>Syringe Pump
Home | Products |Support |Events |News |Links |Promotion |About Us |New Stuff
NE-1600 6-channel Syringe Pump
Holds up to 6 syringes of up to 60 cc each
Infusion rates from 0.568 µL/hr with a 1 cc up to 1337 ml/hr with a 60 cc syringe.
General features:
. Infuses and withdraws.
. Accepts small syringes or large syringes, up to 60 cc.
. Dispense continuously at a fixed pumping rate
. Change pumping rate and direction while pumping.
. Selectable rate units: µl/hr, µl/min, ml/hr, ml/min.
. Dispense a specified volume.
. Dispense according to a pumping program to:
. Pre-program dispense volumes. Each volume can be different.
. Automatically change pumping rates or pumping direction.
. Ramp up or down the pumping rate.
. Timed delays between dispenses.
. Automatically pause the program and wait for the user to continue the dispense.
. Synchronize dispenses with other equipment or pumps to change pumping rates in reaction to a sensor or signals from other pumps.
. Send logic signals to other equipment. Change pumping rates in reaction to a sensor.
. Program the audible alarm to beep at any time to alert the operator.
. Enter the pumping program from the keypad or download it from a computer.
. Operates stand-alone , from an RS-232 computer port or from the TTL logic interface.
. Total volume pumped separately accumulated for infusion and withdrawal.
Programming features:
. 41 programmable phases.
. Set event interrupts from external signals to cause automatic jumps to another part of the program.
. Conditional jumps based on external inputs.
. Nested loops: Repeat a section of the program continuously or a set number of times.
. Program editing functions: Insert and delete program phases. Simplifies program development and updating.
. Allows quick removal or addition of program phases.
. Enter programs from the keypad or from a computer.
. Download or upload pumping programs from or to a computer. Store dispensing programs in a file on your computer, then download them to one or more pumps. Specify in the file to send a different pumping program to each pump in the pump network.
. Automatically change pumping rates.
. Insert timed delays between dispenses.
User interface:
. Easy to use 9 key elastomer keypad with raised keys. Not a membrane switch keypad!
. Simplified user interface.
. No modes to select! Intelligent firmware automatically selects the appropriate operating mode.

PRICES

NE500 (1 syringe) 655,-
Inklusief Starterskit (35,-)

NE1000 (1 syringe) 1049,--

NE1600 ( 6 syringes) 1944,--

NE1800 ( 8 syringes) 1994,--

Discounts:

2-3 pompen: 5%
3-5 pompen: 7,5%
6-20 pompen: 15%

The BESTA SP25 is a precision dosing pump for extremely pulsation depleted extraction. Over an adjustable direct current drive two precision syringes in the push-pull are propelled. At the end of the piston stroke automatic change-over takes place, as valves two dead-volume-poor single solenoid valves are used. In addition can be changed during the enterprise by an external impulse (floating) from the one on the other syringe. Gradual proportion is possible. 5ml, 10ml and 25 ml syringes can be used.

Flow rate : 0,03 - 3,0 ml/min

Pressure : Maximum of 44 psi

Flow external controllable :0-10V / 0-20 mA

External : Start

External : Stop

External : Direction change

Piston : Teflon

Cylinder : Glass

Flow precision : 0,5%

Electric supply : 230V / 50Hz