Manifolds & Accessories
Vacuum manifold to decrease sample preperation time.
Single plate manifold,
high impact polystyrene, for filter plates 1
Aluminium, to hold deep 96-well capture plate 1
Replacement gasket, flat (to fit top plate below Microlute™)
Replacement gasket, profile (to fit between top plate and vacuum chamber)
Acrylic, to hold deep 96-well capture plate
Replacement gasket, flat (to fit top plate below Microlute™)
Spacer Insert, polypropylene to allow use of a 1 ml round well Microplate.
Spacer Insert, HDPE, 350µl, to allow use of 350µl Microplates
in Aluminium manifold
Spacer Insert, HDPE, 350µl, to allow use of 350µl Microplates
in Acrylic manifold
MiniVap ™
Sample concentrator, evaporating
500µl methanol in less than 10 minutes.
The MiniVap™ replaces the Micro DS96 Sample Concentrator and joins the
Ultravap™ in the state of the art 96 well sample evaporator units. The
MiniVap™ is designed for the research and development of the market
when individual plates need drying.
-Straight Needle Kit, set
of 10 c/w Fitting Tool
-Spare Head ( Straight Needles)
-Spiral Needle Kit, set of 10 c/w Fitting Tool
-Spare Head (Spiral Needles)
-Gasket for Needle manifold
-MiniVap™ (240 Volts), with straight needles
-MiniVap™ (240 Volts), with spiral needles
UltraVap™
For fast solvent removal from 96 well Microplates.
For use in sample preparation, SPE, combinatorial chemistry and molecular
biology
Patented spiraled needles create a vortex increasing speed of liquid evaporation
Two stage dry down using heated nitrogen, will dry down and remove 0.5mL of
Methanol in 6 minutes. Simple touch screen prompted programming, simply program
your method and Ultravap does the rest. Pre-fitted with solvent/gas evacuation
tube if unit will be used outside fume hood
Small footprint of 7" x 19" which saves valuable bench space. Standard
RS232 serial port for PC link to use with multi-programming or robotics
