Besta Fraction Collector.
FS 2x40 (the most affordable collector)
80 vials total, 2 rows with 40 vials each
RS232, Step, Home, 24Volt out for magnetic valve. (Step and Home can be Contact
closure or TTL)
The fraktioncollector is low power driven, external Powersuply is included.
FS-ME10
A larger collector has 160
vials and can be upgraded to 320 vials It is a linear Type.
It can be choosen from 2 different control units, timecontrol or drops count,
160 vials, timecontrol . Upgradable to 320 vials
Check
for a Flash Chromatography system
LABOCOL Vario-2000
series
Application
- The LABOCOL Vario-2000 series: Superior fraction collectors with a program
to fullfil all your application needs. An open system with an unlimited number
of fractions, columns and vial sizes with a rack to suit every application.
- With their small proportions and optimal space-saving design, the LABOCOL
Vario-2000 instruments are at home with even the least amount of space. Compact
and versatile, the Vario-2000 range is ideal for research and development,
educational institutions and production industries.
- The models differ in their base size and number of fractions.
- The series consists of the LABOCOL Vario-2000, Vario-2000 Plus and Vario-2000
Ultra.
Special featuers
- Small size
Large number of fractions
- Removable XY system
- Freely programmable XY system
- Touch screen panel serves as the programming console
- The programming console can be positioned independent of the instrument
- Programming of the fractionation time or pump output volume
- Automatic rack recognition
- Flexible capacity
- Aggressive solvents pose no problems as the housing and vial racks are made
of stainless steel
- Compact, optimal use of space
- Unique tubing for solvents
- Built-in flow interruption valve and delay/waste valve
- Up to 625 fractions with a volume of up to 500 ml
- Drain racks for collecting up to 100 fractions independent of volume
- Line or meander operation
- Multiple chromatography, simultaneous dosing of up to 20 columns fractionations
- External inlets and outles such as:
RS 232, Home, Start/Stop, Hold/Continue, Step
Fraction marking and Shutoff of connected instruments etc.
- Range of different vials from 3.6 - 500 ml
Vario-2000
- Width 30 cm, depth 49 cm
- There are 4 different standard rack types available
- Micro racks for a total of 375 micro vials (7,5 ml)
- Standard racks for a total of 240 standard vials (36 ml)
- Semi-preparative racks for a total of 117 semi-preparative vials ( 80 ml),
(only for PC)
- Preparative racks for a total of 60 preparative vials (140 ml) or 60 large
volume vials ( 240 ml)
LABOCOL Vario-2000 Plus
- Width 46 cm, depth 49 cm
- There are 4 different standard rack types available
- Micro racks for a total of 625 micro vials (7,5 ml)
- Standard racks for a total of 400 standard vials (36 ml)
- Semi-preparative racks for a total of 195 semi-preparative vials ( 80 ml),
(only for PC)
- Preparative racks for a total of 100 preparative vials (140 ml) or 100 large
volume vials ( 240 ml)
LABOCOL FS-3000 Fraction collector module
from the LH-3000 Liquid-Handling System Series
Application
- An open system with an unlimited number of fractions, columns and vial sizes
with a rack to suit every application. The instrument size is determined by
the customer's application, whereby the movement of the XY systems can be
up to 2800 mm wide and 670 mm deep.
Special features
- The size can be adapted to suit your requirements
- More than 1000 different sizes and models can be combined
- Movement: Width x-axis up to 3000 mm
Depth y-axis up to 750 mm
- Freely programmable XYZ system
- Can be extended to make a 2-axis device
Aliquot extraction of the fraction in mikrotiter plates
Automatic peak pooling
- Freely programmable sequence of steps
- There is no dead volume as the flow interruption valve and the waste valve
are mounted directly on the Y-arm
- Automatic rack recognition
- Infinite number of fractions via the repeat function and the replacement
of filled racks
- Continuos operation
- Unlimited fraction volume due to numerous draining racks
- Touchscreen program and parameter display
LABOCOL Roto-100
Applications
- Compact, solvent resistant fraction collector with exchangeable racks and
versatile utilization possibilities. Requires little place. Ideal for research
and development, as well as for pilot plant or production.
Special features
- Inclined display with LCD-indication of the preset program and of the current
status
- Universal use through different racks
- Compact construction
- Collection of larger fractions in any desired vessels
- Control of externally connected instruments or valves
- Bar code scanning of the individual positions of the tubes, can also be
modified subsequently
- Time control of 1 - 999 minutes or seconds
- External inputs: time-reset, manual, home hold, run/stop
- External outputs: marker, intermediate disconnection, final disconnection
(110/220/24 volt, currentless contact) marker for final disconnection
- The actual program can be overwritten directly and implemented immediately
- Home-functions allow to start repeated runs at the same position or vial;
can be connected to automatic sample injection systems
- Preset fraction number and preset fraction time always displayed
Available racks
- Micro rack
For use with 80 micro vials
(OD 11 mm, length 80 mm, volume 7.5 ml)
- Standard rack
For use with 80 standard vials
(OD 18 mm, length 180 mm, volume 36 ml)
- Preparative/large volume racks
For use with 20 preparative vials
(OD 36 mm, length 170 mm, volume 140 ml) or for use with 20 large volume vials
(OD 36 mm, length 285 mm, volume 240 ml)
- 40-fold distribution ring
Allows the collection of big quantities in any desired vessel. The distribution
ring is made of polyethylene. The 40 connections are adapted to tubing of
ID 6-10 mm.
